The steel pin is a wedge pin which connects the core belt with the back rib and the positive angle stapler with the back rib. It is mainly used as a tool to reinforce the position of the positive angle between the formwork and the template.
The working principle of wooden beam connecting claw is that two claws are hooked on the flange of channel steel, and the other sawtooth hook is hooked on the flange of wooden beam. The wooden beam and channel steel quality inspection are connected by tightening bolts.
Cable-stayed seat is to use two templates to overlap each other. The two templates are pulled together through 45 degrees oblique angle by using a positive angle puller. This kind of tie-up is more firm and increases the integrity of the template.
Connecting boards are used in areas where the height of the project floor is not uniform and the length of the wooden beam is insufficient. On the two wooden beams, four bolts are used to connect the connecting plate and the connecting hole of the wooden beams. It has the characteristics of flexible height connection and convenient regulation.
Cylinders with spiral grooves or cones with spiral grooves cut on the outer surface are mostly used in plastic forming equipment with high temperature resistance, wear resistance and long service life; corrosion resistance, high strength and can withstand large torque, high speed advantages have good cutting performance.
Steel gaskets are made of high hardness carbon steel sheets. Usually used in electronic instruments, die manufacturing, precision machinery, hardware parts, machinery parts, stamping parts, hardware manufacturing, motor adjustment has the characteristics of high precision, strong tension, good finish, easy to break.
Channel steel back corrugation is the product of technological innovation in formwork reinforcement system. It has the characteristics of flexibility, arbitrary combination, simple operation, high strength, good pouring effect and construction safety. It not only improves the construction quality, but also reduces the construction project cost as a whole.
Steel nut is a kind of fastener which is screwed together with bolt or screw and plays a reinforcing role.
Hook is one of the most common lifting tools in lifting machinery. The hook is usually suspended on the wire rope of the lifting mechanism by means of pulley set and other components.
Connect two templates so that the two templates are closely connected at the same level
Operation Platform for Reinforced Concrete Construction
It is the connection between the back corrugation of the formwork and the tripod, so that the tripod and the template can be used as a whole.
